This is the Wot-Knot fuselage side kit. This will come unjoined and will require you to join the two halves over the plan (at the laser-cut seam) before assembly.
This helps keep the cost of postage to a minimum. If you would prefer a pre-joined set I will be making this available here soon but the cost of shipping will push the cost up.
Fusalage Sides
Assembly Tips
The two halves of the fuselage are cut accurately by a laser but, as with all cutting tools, the Kerf (the gap left by the blade, laser or CNC tool bit after the material has been removed) leaves room for slight movement when put together. To be sure you have it aligned correctly please assemble it over the top of your film-protected plans so you can check it before the glue sets. Let it set BEFORE removing it from your plan, following these guidelines will ensure a perfectly matched pair of fuselage sides. This is the most important step because an out-of-line fuselage will affect the rest of the build and at worst leade to a poor flying model.
